Like the wingtip we go to “Part Properties” and set the “Z” Rotation of the wing from 6.5 to “0” (remember, we keep the 6.5 in mind), instead the aileron we make the right flap, again that will follow the same proceedings as with the aileron.
To make the wings will follow nearly the same proceedings like the wingtip. Now we have to name the part and make it breakable, go to “part properties” look at “part Name” than press the “Browse” button at the right, there is another window called “Category” use the dropdown menu and select “Aircraft Keyframe Animation”, in the following menu select “r_wingfold”, press “OK” (picture 156), now we look again into the “Pre-Process” window, press “Add” than press “Load Preset”, scroll down until you find “Right Wing Tip Visible” and select it (picture 157) close all Windows.īack to the aileron, select the aileron part and go to part properties, click the browse button, “aircraft stock animation” and select “r_aileron”, press “OK” (picture 158), now parent the aileron to the “r_wingfold” part (picture 159) and close all windows. Again we had to move the axis only, so press “Move Mode” and select “X” and “Y” axis only, than press shift and move the axis of the part to the upper left corner of the part as shown in picture 155. Going back to the wingtip part, this should be breakable (CFS2 only) and it should be foldable also. The first Aircraft 14, wingtip and aileron 2 Next we have to align the axis with the aileron as shown in picture 154.
To have a correct aileron animation we have to move the aileron axis outside (Move Mode) than press shift and move the axis into position as shown in picture 153 (it doesn’t matter if you move the axis more or less outside). We will notice the part moved down, now do the same with the “aileron”. To keep the next steps easy, go back to the wingtip part, got to “Part properties” go down to “Rotation” and “Z” there is a number inside that describe the angle of the axis (6.5) (picture 152) we have to keep this number in mind and set the number to “0”. The next proceeding is to close the gaps of the aileron.
Go to “poly mode” and select the poly’s as shown in picture 150 than split the part from the wing (part split Part), center on part, than select the poly’s of the aileron (picture 151) and split the aileron poly’s from the wing tip. I will start with the right wing only because the proceedings for the left wing are similar.īecause we will make the aircraft breakable we will define the wing tip. The first Aircraft 14, wingtip and aileron 1
0 kommentar(er)
